Codmetel: HV005036-2001

Advanced multifunction device for verification of electric safety of private and industrial electric systems (IEC/EN61557-1)

  • All verifications of electric safety provided for by standards IEC/EN61557-1.

  • Advanced Loop Verification of magnetothermal protections, fuses and cable sizes.

  • Earth resistance by voltammetric method with 2 or 3 spots in TT, TN and IT systems, overall earth resistance measurement and with clamp meter T2100 (optional). Ground resistivity.

  • Measurement of electric parameters insingle-phase installations (V,A, W, VAR, VA, PF)

  • Test of RCDs type A, AC, B up to 1A, also with separate clamp jaws with test current up to 10A (with optional accessory RCDX10).

  • Measurement of insulation resistance.

  • Measurement of continuity of protection conductors.

  • Verification of phase sequence (SEQ) and leakage currents.

MT-300 is a revolutionary device. Its TFT colour display with capacitive touch-screen allows using this device in a completely new manner. MT-300 makes available on its display all possible variables to obtain a perfect measurement; your task will only be to “touch” what you really want to measure: then simply leave the rest to MT-300’s micro-processor!
The device complies with all requirements as regards the safety of electric systems: test of RCDs type A, AC also up to 1000 mA and type B; insulation, continuity, earth resistance tests (this also with the aid of the optional clamp T2100).
With the appropriate programming guided by the touch-screen system, this device can test the interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C, D, K and fuses type gG and aM! The device can be used with external feelers for measuring environmental parameters such as air temperature/humidity, illuminance (Lux) further to measuring leakage currents, cosphi, power and harmonics, Loop/Line impedance and calculating the assumed short-circuit current with high resolution (0.1mOhm) in TN systems with use of optional accessory IMP57. Cutting-edge management of measurement with indication, at the end of each safety test, of compliance or non-compliance with requirements with simple symbols OK o NOT OK.

Instrument available on the Chinese market through HT China office only

Functions
Guidelines
  • CE MARK
  • CEI 64-8 612.6.2
  • 17th edition
  • CEI 64-8
  • CEI 64-8 612.3 .4 .5
  • CEI 64-8 612.6.1
  • CEI 64-8 612.6.3
  • EMC 2004/108/CE Directive
  • LVD 2006/95/CE Directive
  • DPR 462 del 22/10/2001
  • EN 61008
  • EN50522
  • IEC/EN 61010-1
  • IEC/EN6090-0
  • IEC/EN61557-1
  • IEC/EN61557-2
  • IEC/EN61557-3
  • IEC/EN61557-4
  • IEC/EN61557-5
  • IEC/EN61557-6
  • IEC/EN61557-7
  • VDE 0100
  • CEI 64-8 612.2
  • EMC: IEC/EN61326
  • None

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES