NEPTUNE is a mix of technology including an instrument for electrical safety testing (insulation up to 1000V and continuity with 200mA), a Harmonics analyzer and a TRMS multimeter.
Functions
TRMS
|
|
Measuring counts
|
10000 |
DC/AC TRMS voltage up to 1000V
|
1000V / AC+DC |
DC, AC TRMS, AC+DC TRMS current by means of external clamp transducer
|
|
AC TRMS current by means of external flexible transducer F3000U
|
|
Leakage current with optional clamp meter
|
|
Electric motor starting current (INRUSH)
|
|
Insulation with voltage 50, 100, 250, 500, 1000VDC
|
According to IEC/EN61557-2 |
Measurement of dielectric absorption ratio D.A.R.
|
|
Measurement of polarization index P.I.
|
|
Continuity of protective circuit with 200mA
|
According to IEC/EN61557-4 |
Voltage and current harmonics up to the 25th and THD%
|
|
LoZ Input
|
|
Frequency
|
|
Phase sequence
|
|
Resistance and continuity test with buzzer
|
|
Out come OK/NOT OK
|
According to IEC/EN60364-6 |
Bargraph
|
|
Backlit LCD display
|
|
MAX/MIN/HOLD
|
|
Measurement category
|
CAT IV 600V / CAT III 1000V |
Weight in grams (batteries included)
|
420 |
Size (L x W x H)
|
175x85x55 |
Guidelines
-
CEI 64-8
-
IEC/EN61010-1
-
IEC/EN61010-2-030
-
IEC/EN61010-2-033
-
IEC/EN61326-1
-
IEC/EN61557-1
-
IEC/EN61557-2
-
IEC/EN61557-4
-
IEC/EN61557-7
-
UNE20460
STANDARD ACCESSORIES
Calibration report
Calibration report
Codmetel: -
YAAMK0001HT0
PAIR OF TEST LEADS ALLIGATOR CLIPS COLOUR RED/BLACK 4MM
Codmetel: HA000144
- Measuring range: 10A / 1000V
- Measurement category: CAT IV 600V / CAT III 1000V
- Maximum opening of alligator clip: 3cm
- Banana diameter: 4mm
Can only be used with YAAMK0000HT0 leads
Batteries and user manual
4324-2
Pair of test tips red, black 2/4mm straight banana
Codmetel: HA000765
- Measurement category: CATII 1000V without cap (CATIII 1000V and CATIV 600V with cap)
- Lead overall length: 15cm
- Tip length: 18mm
- Tip diameter: 2mm without lantern / 4mm with lantern
- Cable length: 120cm cable only (140 with banana and tip)
- Banana diameter: 4mm
OPTIONAL ACCESSORIES
HT96U
Codmetel: HP00096U
- Measuring range: 1mA÷1000A
- Basic Precision: ± 1.0%reading
- Basic accuracy: CAT III 600V
- Clamp jaw internal diameter: 54mm
- Output connector: Hypertac
HT97U
STANDARD CLAMPS FOR AC CURRENT
Codmetel: HP000972
- Measuring range: 0.1÷1000A
- Basic accuracy: ± 1.0%reading
- Measurement category: CAT III 600V
- Clamp jaw internal diameter: 54mm
- Output connector: Hypertac
HT98U
STANDARD CLAMP FOR DC CURRENT
Codmetel: HP00098U
In combination with Multimeters and Clamps, the NOCANBA adapter (optional accessory) is required.
In combination with the PQA820 instrument, the ACONBIN adapter (optional accessory) is required.
- Measuring range: 1÷1000A
- Basic precision: ±(1.0%reading +0.5A)
- Basic accuracy: CAT III 600V
- Clamp jaw internal diameter: 52mm
- Output connector: Hypertac
NOCANBA
HYPERTAC ADAPTER FEMALE MALE BANANA
Codmetel: HA00NOCA
F3000U
Codmetel: HP03000U
AC flexible clamp with 30/300/3000A full scales
HT4006
AC/DC current clamp with 40/400A full scales
Codmetel: 2058
- Measurement range: 0.1A÷40A AC/DC (40A range)
- Measurement range: 0.5A÷400A AC/DC (400A range)
- Basic accuracy: ± 2.5%reading
- Measurement category: CAT III 600V, CAT IV 300V to ground
- Max cable diameter: 30mm
- Output connector: safety banana, cable length 1m
C2065
3- banana (red-black-green) to shuko plug cable
Codmetel: HA002065